• State Answer Suggested
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 82 subscribers
  • Views 383 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

release mode with experimenter kit 28035 and controlsuite project

thomas colinet
Prodigy 60 points

Other Parts Discussed in Thread: CONTROLSUITE

Hi,

I'm actually working on an experimenter kit (picolo f28035) with de HVPM project of controlsuite and CCS4. I'd like too use the release mode but I'm only able to use the debug mode.

Could you help me to configure de release mode for this project?

 

Thank a lot

 

Thomas

  • 0
    Genius 4925 points

    Hi Thomas,

    Not shure if I am getting your point but I'll give it a try: Basically you can configure release mode on rightclicking on your project root -> build properties. In the window that opens, you can define different configurations such as release, debug, FLASH etc.
    To use one of the defined modes you rightclick again on the project root -> Active Build Configuration -> your configuration. Is this the answer to your question?

    Best Andreas