• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 487 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Cannot download EEPROM file from C2000 Experimenter Kit "Dual RS232" Fix post

andrei markovits
Prodigy 30 points


Hello ,

Related to the post

e2e.ti.com/.../21086

I have problem locating and downloading the file advertized at point 3.

3) Download the XDS100_wUART.txt file attached to this post and RENAME IT to be XDS100_wUART.ept (this file can also be found by clicking on my profile)

Please re-post the file or fix the links

  • 0
    TI__Mastermind 30255 points

    Fullscreen XDS100_wUART.txt Download 
    [Basic Details]
Device Type=5
VID PID Type=1
USB VID=0403
USB PID=A6D0
[USB Power Options]
Bus Powered=1
Self Powered=0
Max Bus Power=200
[USB Serial Number Control]
Prefix=TI
Use Fixed Serial Number=0
Fixed Serial Number=12345678
[USB Remote WakeUp]
Enable Remote WakeUp=0
[Windows Plug and Play]
Enable Plug and Play=1
[USB String Descriptors]
Manufacturer=TI
Product=Texas Instruments XDS100+RS232 V1.0
[Programming Options]
Only Program Blank Devices=1
[BM Device Specific Options]
USB Version Number=1
Disable Serial Number=0
IO Pin Pull Down in Suspend=1
[Dual Device Specific Options A]
RS 232 mode=1
245 FIFO mode=0
245 CPU FIFO mode=0
OPTO Isolate mode=0
High Current Drive=1
[Dual Device Specific Options B]
RS 232 mode=1
245 FIFO mode=0
245 CPU FIFO mode=0
OPTO Isolate mode=0
High Current Drive=0
[Dual Device Driver Options A]
Virtual Com Port Driver=0
D2XX Driver=1
[Dual Device Driver Options B]
Virtual Com Port Driver=1
D2XX Driver=0
[R Device Specific Options]
Invert TXD=0
Invert RXD=0
Invert RTS#=0
Invert CTS#=0
Invert DTR#=0
Invert DSR#=0
Invert DCD#=0
Invert RI#=0
C0 Signal=-1
C1 Signal=-1
C2 Signal=-1
C3 Signal=-1
C4 Signal=-1
Enable Ext Osc=0
High Current I/O=0
Load D2XX Driver=0
In EndPoint Size=0

    Hello,

    Here is the file you requested.

    Best Regards,

    Chris