How to generate the out file?

wayne lu1

Expert 1255 points

I having a project and trying to debug it.

It shows "could not open file".

I know because it doesn't have .out file.

So I rebuild this project again but the problem still happen.

The out file still no generate.

How do I fix this problem.

Regards,

Wayne

over 10 years ago

0 Gautam Iyer over 10 years ago

Guru 192875 points

Hi Wayne,

The project not having .out file means it is not able to compile the code due to errors. Try rebuilding the code using Re-build option and check for the list of errors. Sometimes only building does not display errors.

Regards,
Gautam

0 wayne lu1 over 10 years ago in reply to Gautam Iyer

Expert 1255 points

Hi Gautam,

I have re-build the project.
But it still have the same situation.
The "Problem" window doesn't show any error.
The "Console" window is shows the same as the second figure.

Regards,
Wayne

0 Roger Périat over 10 years ago in reply to wayne lu1

Expert 2040 points

Hi Wayne

You have defined a path as preinclude option, not a file.

If you want to define a path as include path set the --inlcude_path property, not the --preinclude.

Both found on project->properties ->Build->C2000 Compiler->Inclkude Options.

Regards,

Roger

0 wayne lu1 over 10 years ago in reply to Roger Périat

Expert 1255 points

Hi Roger,

I am trying include path for instead.
It still shows some .h file can not open.
So I include them in preinclude file.
But still have problems.

Thanks,
Wayne

0 Roger Périat over 10 years ago in reply to wayne lu1

Expert 2040 points

1) Try to use #include "py.h" instead of <py.h>

2) Locate the file you need. Check the path of this file.
If in C code you have this line: #include "ThisFile.h" without path before file name you must set the path as include path.
If your header file is in C:\MyHeaders\ThisFile.h --> set include path to C:\MyHeaders

0 wayne lu1 over 10 years ago in reply to Roger Périat

Expert 1255 points

The problem seems fix.
But still occur other new question.

#137 struct "PIE_VECT_TABLE" has no field "DINTCH2" (Error)
What is this mean?

C2000™︎ microcontrollers

C2000 microcontrollers forum

How to generate the out file?