TMS320f28335 configurations to operate in either fixed point or floating point mode

shady mamdouh

Intellectual 575 points

how can i configure the dsp f28335 to run in fixed point or floating point mode of operation?

over 11 years ago

0 Gaston_Melo_Arg over 11 years ago

Mastermind 7675 points

check this links:

you can download this soft to check sample code for your processor.

Gastón

0 Gautam Iyer over 11 years ago

Guru 192875 points

Hi Shady,

In Project-> Properties you've Processor Options under C2000 Compiler. There you can select or deselect floating point support.

Regards,
Gautam

0 Lionel Carreira over 10 years ago in reply to Gautam Iyer

Prodigy 30 points

hello,

I use CCS V6.1.1 with C2000 compiler V15.9.0 STS and in "processor options", there is no checkbox to turn ON or OFF the floating point support.
I only have a parameter "Specify floating point support" with a drop-down menu with 2 choices : fpu32 or softlib but I don't know what it means.
I would like to disable floating point support in order to operate in fixed point mode.

Thank you

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320f28335 configurations to operate in either fixed point or floating point mode