• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 82 subscribers
  • Views 468 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PLC kit with CCS UniFlash - save/export memory

Emilio Sirignano
Intellectual 525 points
Other Parts Discussed in Thread: UNIFLASH

Hello everybody,

I'm using the PLC kit with CCS UniFlash,  I'm continuing to feel absolute beginner with this kit.  I would like to save/export memory from F28069 ControlCard (should be G3 7.2.1.10 Firmware on it). I have created the F28069 target configuration; if I would like to save the all memory data at this point in the export/save window how I should fill the text boxes? I mean with regard to the "start address", "length in words" and so on.

Please could you help me to resolve this?

Thanks in advance,

Emilio Sirignano