• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 83 subscribers
  • Views 449 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

C2000 PIccolo LaunchPad - I have CCS 6.0 for MSP430, how do I get support for C2000 from there?

Kevin Koffink
Prodigy 10 points

Other Parts Discussed in Thread: CONTROLSUITE, MOTORWARE

I have a C2000 PIccolo LaunchPad. I already have CCS 6 on my machine for developing MSP430 programs. Can I get the new compiler into that or do I need to download and install a whole new CCS?

I have already downloaded and installed controlSUITE. I'm not making the connection. Is InstaSPIN-FOC part of controlSUITE?

It is not clear what my next step should be. Can anybody give me guidance?

  • 0
    TI__Mastermind 30255 points
    Hello,

    If you only selected MSP during device selection while installing CCS, then you need to install TI C2000 Device support. (In CCS Help->Install New Software). Additionally, the latest C28 codegen tools (compiler) can be installed the same way. If that gives you trouble, you can also rerun the CCS installer and make sure to select C2000 during installation. Then proceed to update your device support and compiler version.

    For instaSPIN, you need to download Motorware. (www.ti.com/.../motorware)

    Best Regards,
    Chris
  • 0
    Guru 192875 points
    Hi Kevin,

    Additional to Chris's comments, you would have to check for the license type too. As, if you don't have the full license then you would be using the code limit license for MSP, correct me if I'm wrong. As for C2000 family if you're using XDS100 or any dev kits from TI you can opt for Free License which is as good as full license for C2000 devices.

    Regards,
    Gautam