DRV8312 BLDC_sensored from f28035 to f28069

Armand M.G.

Other Parts Discussed in Thread: TMS320F28069, TMS320F28035, DRV8312, CONTROLSUITE

Hi,

I am working with the DRV8312 kit and the controlSUITE software BLDC_sensored. It is conceived to work with the TMS320F28035 controlCARD but I am using the TMS320F28069.

Is there any way to adapt the software to my controlCARD? or the only way is to purchase the f28035?

Thank you very much!

over 9 years ago

0 Rick Duncan over 9 years ago

TI__Guru** 114905 points

Hi,

Your post is being moved to the C2000 forum for better support.

A quick search of the forum found this LINK which discusses using the F28069 with the DRV8312

If there are any issues with using the F28069, they can help.

0 Armand M.G. over 9 years ago in reply to Rick Duncan

Prodigy 205 points

I believe this link gets me to my own post.

0 Rick Duncan over 9 years ago in reply to Armand M.G.

TI__Guru** 114905 points

Sorry, trying again. LINK

0 Armand M.G. over 9 years ago in reply to Rick Duncan

Prodigy 205 points

I did not have the same problem as the one exposed in the link.

However, I could make the it work: right click on the project (in the Project Explorer tab) - Build Configurations - Set Active - F2806x_RAM

It was set by default to F2803x_RAM

Thank you very much anyway!

C2000™︎ microcontrollers

C2000 microcontrollers forum

DRV8312 BLDC_sensored from f28035 to f28069