• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 82 subscribers
  • Views 716 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

please help to debug the error

Shivaleela Patil
Prodigy 60 points

Other Parts Discussed in Thread: TMS320F28335

HI,

I am using TMS320F28335  TI DSP.  and I am programming the dsp with matlab simulink using ti support package for c28xx and using ccs6. I am getting the following error .

please help me to debug this issue  

Failed CPU Reset: (Error -1137 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation.

I do not know how to solve this issue please help.

  • 0
    Guru 192875 points
    Hi,

    Check for the voltages on board. Probe the TRST and XRS pins.

    Regards,
    Gautam
  • 0 in reply to Gautam Iyer
    Prodigy 60 points

    Hi Gautam,

    please tell me how to fix  this error. You suggested me to probe XRSn pin please tell me how to fix it. it is very urgent. I am running out of time.

    Texas Instruments XDS100v2 USB Debug Probe/C28xx : Target must be connected before loading program.
    C28xx: Failed CPU Reset: (Error -1156 @ 0x6) Device may be operating in low-power mode. Do you want to bring it out of this mode? (Emulation package 6.0.14.5)
    C28xx: Failed Software Reset: A reset is already in progress: (Error -1137 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)

  • 0 in reply to Shivaleela Patil
    Guru 192875 points
    As I said previously, you need to check for the voltage levels on the board and probe the above pins. Is this a custom or TI dev kit?