Regarding C2000 Piccolo F28027 and F28027F offline mode functioning

Anuroop Reddy Dasari

Other Parts Discussed in Thread: MOTORWARE

Respected Sir/Madam,

Recently I bought C2000 Piccolo F28027 and F28027F want to use it in offline mode ( without GUI ), I'm unable to do, so could you help me out by giving the procedure to run it offline. ( I mean especially in code modifications )

Regards,

Anuroop

over 9 years ago

0 Anuroop Reddy Dasari over 9 years ago

Intellectual 255 points

I'm using a 3 phase bldc motor

0 ChrisClearman over 9 years ago in reply to Anuroop Reddy Dasari

TI__Guru** 119670 points

for the F28027F to use InstaSPIN-FOC use MotorWare
follow the Project & Lab UG to understand the different labs and the functionality.

you will likely start with one of
proj_lab05a (Torque), 05b (velocity), 10a (velocity with over-modulation for higher speeds)

and modify the code with your own communications, interface, and background logic.

then you will need to program the .out to the Launchpad and power cycle with the proper Boot Mode switches set (which you can read about int he LP UG).

C2000™︎ microcontrollers

C2000 microcontrollers forum

Regarding C2000 Piccolo F28027 and F28027F offline mode functioning