Inter process Communication

ramakrishna dutt

Intellectual 760 points

Other Parts Discussed in Thread: CONTROLSUITE

Hi,

I am working on two controllers 28027, 28035.

Can u suggest the example code whichever is having the communication setup between these two controllers.

Please.

over 10 years ago

0 Vivek Singh over 10 years ago

TI__Guru** 116971 points

Hi Rama,

Which communication interface you are planning to use for this? There are example code for SPI/SCI/I2C for each of these devices and based on what you want to use, you can refer that example.

Regards,

Vivek Singh

0 ramakrishna dutt over 10 years ago in reply to Vivek Singh

Intellectual 760 points

I understood that, but my doubt is I have to transfer data using SPI for example between 28027 & 28035.
Kindly give the link of example code which do this type of communication?

0 Vivek Singh over 10 years ago in reply to ramakrishna dutt

TI__Guru** 116971 points

Rama, Both device have same SPI module. controlSUITE may not have exact same example what you are looing for but it'll have sample of master SPI and slave SPI code which you can refer to develop the code as per your need.

Regards,
Vivek Singh

0 ramakrishna dutt over 9 years ago in reply to Vivek Singh

Intellectual 760 points

Sir,
In control suite we are not finding this type .
If u have please send the code name which communicates between two controllers using SPI.

C2000™︎ microcontrollers

C2000 microcontrollers forum

Inter process Communication