Solar Explorer Development Kit with Piccolo TMS320F28035 MCU

user4702538

Other Parts Discussed in Thread: CONTROLSUITE

Hi, we have started to study on TMDSSOLARPEXPKIT which, is low voltage kit. with Piccolo F28035 control card. We have a connection problem named as "SC_ERR_FTDI_OPEN". How can we solve this problem?

over 9 years ago

0 Gautam Iyer over 9 years ago

Guru 192875 points

Hi,

Is your controlCard getting powered up?

Regards,
Gautam

0 user4702538 over 9 years ago in reply to Gautam Iyer

Prodigy 20 points

Yes, sure. We able to connect to the F28027 chip, and also we can connect to F28035 control card by using emulator XDS560v2. But we can't connect to the F28035 control card by using jtag connection.

0 Gautam Iyer over 9 years ago in reply to user4702538

Guru 192875 points

I would suggest you to go through the HW guide once, the same can be found here:
C:\ti\controlSUITE\development_kits\SolarExplorer_v1.1\~Docs

0 Lori Heustess over 9 years ago in reply to Gautam Iyer

TI__Guru* 93800 points

Did you check your VID/PID to see if the EEPROM is programmed correctly?

processors.wiki.ti.com/.../XDS100

C2000™︎ microcontrollers

C2000 microcontrollers forum

Solar Explorer Development Kit with Piccolo TMS320F28035 MCU