• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 364 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28335, ePWM

David Nupnau
Prodigy 10 points

Other Parts Discussed in Thread: TMS320F28335

Hello,

I'm using a TMS320F28335 to control a 3-phase inverter that is powering a BLDC engine.

I'm programming with Mathlab/SImulink. For that I need PWM Signals.

My problem is that I can't configurat the ePWM module to close both transistor of a halfbridge, so that the signal is floating.

Thanks for helping

  • 0
    TI__Mastermind 27200 points

    Hello David,

    Can you give us a little more information on what you want to do please?  I can then tell you whether the device is capable of it and how to configure it.  However,if the question is specifically about Matlab/Simulink products, I recommend re-posting it on The Mathworks support forum.  Thanks.

    Regards,

    Richard