Invalid target config file.

Shing Yip

I have development on both 28027 and 28069. After switching back from 28067, the debug target configuration missing.

"A specified CPU has not been selected. Please select target configuration on the Main tab." is shown on Debug section of all of the project properties of 28069 lab projects. I cannot find where to define my project target CPU.

over 9 years ago

0 Gautam Iyer over 9 years ago

Guru 192875 points

Hi,

Can you share the screenshot of the Project Properties? Your window should look like this:

Also, check your target configuration file: Navigate to Window -> Show -> Target Configuration

Regards,

Gautam

0 Shing Yip over 9 years ago in reply to Gautam Iyer

Prodigy 230 points

0 Gautam Iyer over 9 years ago in reply to Shing Yip

Guru 192875 points

and what about target configuration?

0 Shing Yip over 9 years ago in reply to Gautam Iyer

Prodigy 230 points

I cannot find the Debug config, only flash and release build available.

0 Gautam Iyer over 9 years ago in reply to Shing Yip

Guru 192875 points

check your target configuration file: Navigate to Window -> Show -> Target Configuration

0 Gautam Iyer over 9 years ago in reply to Shing Yip

Guru 192875 points

check your target configuration file: Navigate to Window -> Show -> Target Configuration

C2000™︎ microcontrollers

C2000 microcontrollers forum

Invalid target config file.