• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 82 subscribers
  • Views 246 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

c2000 piccolo

chitranjan kumar rai
Prodigy 20 points

Other Parts Discussed in Thread: CONTROLSUITE

Hello all,

I am using LAUNCHXL-F28027 and i need to know how to connect function generator with my launch pad and see the signal in the CRO

Plz help me i am new with this kit

  • 0
    TI__Guru 60865 points
    Hi Chitranjan,

    From a SW perspective, you should download ControlSUITE and then run the adc_soc example. Use a DC signal from your function generator to start. Use the launchpad schematic in ControlSUITE to get the correct pin connections.

    Once you have verified that a DC signal is working, you can expand the example to use a larger conversion buffer, and then you can use the CCS graphing tool to examine the captured results (alternately you can dump the memory contents to a file, and then plot with excel or similar).