DRV8312 BLDC_sensored hall sensor

umit GULER

Intellectual 490 points

Other Parts Discussed in Thread: DRV8312, CONTROLSUITE

Hi everyone,

I investigated DRV8312 BLDC_sensored with F28069 but I did not see hall effect sensor code.

Can I use hall effect sensor DRV8312 with F28069 ControlCard? Is there a any code for that?

Best Regard..

over 9 years ago

0 Brett Larimore over 9 years ago

TI__Guru 57255 points

Hi,

It appears this partially got answered in your thread with Mr. Clearman in the InstaSPIN forum, but wanted to briefly respond here as well.
https://e2e.ti.com/support/microcontrollers/c2000/f/902/t/519029

If you are looking to go the non-InstaSPIN route, the following example may be helpful. Note that there is a F2806x_RAM build configuration for the project:
\controlSUITE\development_kits\DRV8312-C2-KIT_v128\BLDC_Sensored\

Thank you,
Brett

0 umit GULER over 9 years ago in reply to Brett Larimore

Intellectual 490 points

Hi Brett,
Thank you for your respond.
I wanna use BLDC motor with hall effect sensor.
Is there any kit diffrent from DRV8312 for hall effect sensor with supported software in contronSuite?

0 Brett Larimore over 9 years ago in reply to umit GULER

TI__Guru 57255 points

Hi,

The TMDSHVMTRPFCKIT is a possibility:
\controlSUITE\development_kits\HVMotorCtrl+PfcKit_v2.1\HVBLDC_Sensored\

Both this kit and the DRV8312 kit are based on the digital motor control library located within controlSUITE. As a result, there is some similarity between the two projects.

Thank you,
Brett

0 umit GULER over 9 years ago in reply to Brett Larimore

Intellectual 490 points

thank you Brett

best regard..

C2000™︎ microcontrollers

C2000 microcontrollers forum

DRV8312 BLDC_sensored hall sensor