Flash and lock TMS320F28035PAGT

5t34m

Intellectual 1185 points

Hi all,

I'm using TMS320F28035PAGT in combination with CCS 3.3 and JTAG Spectrum Digital C2000.

It is very uncomfortable to first flash and in a second step lock the controller with a password.

Is there a better/faster way to flash a hex-file and lock the controller in one step?

Please advise.

Thanks

-5t34m

over 9 years ago

0 Gautam Iyer over 9 years ago

Guru 192875 points

Hi,

Did you check Codeskin's C2Prog?

Regards,
Gautam

0 Hareesh Janakiraman over 9 years ago

TI__Guru* 95315 points

Are the passwords part of your ".out" file? IOW, you could make the password part of your hex file.

0 5t34m over 9 years ago in reply to Hareesh Janakiraman

TI__Intellectual 1185 points

How can I combine the password to the hex?

0 Hareesh Janakiraman over 9 years ago in reply to 5t34m

TI__Guru* 95315 points

Make sure the password locations are part of the COFF file. I presume your passwords are stored in a separate asm file (such as the attached). Make sure this file is included in your project.

DSP2803x_CSMPasswords.asm

C2000™︎ microcontrollers

C2000 microcontrollers forum

Flash and lock TMS320F28035PAGT