| Hello, How can i test ezDsp2808 CAN BUS protocol? I want to communicate CANA and CANB in ezDsp2808 board. I couldn't succeed to communicate. The CANA and CANB of the ezDsp2808 is connected by CAT5 cable. The length of the cable is nearly 20 cm. I tried the sample program below in ezDsp2808 board. C:\tidcs\c28\dsp280x\v110\DSP280x_examples\ecan_a_to_b_xmit The CANTA register of the CANA gives me transmit acknowledgement. But, we can not see the data in the CANB registers. Why does it give me transmit acknowledgement although the date is not in the register(ECAN RMP) of the CANB? I also tried the following program in the same ezDsp2808 board. But, I couldn't succeed the communication between CANA and CANB C:\tidcs\c28\dsp280x\v110\DSP280x_examples\ecan_back2back. If you send correct working sample codes except the code in link above, I will very happy. Best Regards, Mustafa |
-
Ask a related question
What is a related question?A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.