Problem to program TMS320F28075 with C2000 Gang Programmer

Alex Giardinieri

Prodigy 30 points

Other Parts Discussed in Thread: TMS320F28075

Hi to all,

I'm trying to program TMS320F28075 using controlCARD Docking Station R4.1 and F2807x controlCARD R1.1

When I make ERASE I have an error at "step 6 Set PLL freq." error "ERROR 70: DSP CLK frequency error"

I tried to modify the DSP clock whithout success.

Please, help me.

Thanks

Alex

over 9 years ago

0 Gregory Czajkowski over 9 years ago

Expert 2200 points

Hi Alex,

The freq. error means that the expected and measured frequency are not the same (with tolerance 5%). What frequency are displayed on the GUI (OSC and SYS)?

Regards

Gregory Czajkowski
Elprotronic

0 Alex Giardinieri over 9 years ago in reply to Gregory Czajkowski

Prodigy 30 points

Hi Gregory,

unfortunately the GUI doesn't show the value of frequency.

Attached the print screen.

Thanks

Regards

Alex Giardinieri

0 Vivek Singh over 9 years ago in reply to Alex Giardinieri

TI__Guru** 115881 points

Alex, Is this issue resolved?

0 Alex Giardinieri over 9 years ago in reply to Vivek Singh

Prodigy 30 points

Hi Gregory,
I didn't solve the problem.
I update the SW without successful.

Do you have other suggestion?

BR
Alex

C2000™︎ microcontrollers

C2000 microcontrollers forum

Problem to program TMS320F28075 with C2000 Gang Programmer