• State
  • Locked Locked
  • Replies 5 replies
  • Subscribers 84 subscribers
  • Views 1154 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

communigation c2000 and bq76pl455

user4798828
Prodigy 20 points

Other Parts Discussed in Thread: BQ76PL455A-Q1, TMS570LS0432, LAUNCHXL-F28027

hello  . I want to make comminigation bq76pl455 between TMS320F2802X ( C2000)  LAUNCHPAD XL .But ı can't  make the settings c2000 sample cod in CCS . How can I make the settings ? 

  • 0
    TI__Expert 5940 points
    Hello,

    Can you please elaborate on which settings in CCS you're having issues with? For example, you can take a screenshot or copy/paste the descriptions. This will help us assist you better.

    Elizabeth
  • 0 in reply to Elizabeth Joy
    Prodigy 20 points

    a

    ı can not select  this category the  bq76pl455 example code in c2000 .  always  ı see arm  . I don t see c2000 . How I select the c2000  ? 

    this my eror list . ı m not debug this pl455

  • 0 in reply to user4798828
    Guru 30330 points
    If I am understanding this correctly, you are attempting to run the bq76PL455A-Q1 example code on the LAUNCHXL-F28027 Launchpad? I just downloaded the code and it is written for the TMS570LS0432 Launchpad. These products are not code compatible and the code will not run as is on the F2802x.

    Briefly looking over the code, it looks like you should be able to port the code over into a native F2802x project (either built from scratch, or modified example).

    All that being said, you have a lot of errors that i have never seen before in CCS. I will try to get someone to pop over here and chime in regarding those.

    -Mark
  • 0 in reply to user4798828
    TI__Guru**** 475251 points

    user4798828 said:

    By looking at some of the errors, I see that you are using CCSv5. What exact version of CCSv5 are you using? There were also a few known issues with DVT plugins in CCSv5 that was resolved in CCSv6. Any chance you could upgrade to the latest CCSv6 version?

    Thanks

    ki

  • 0 in reply to Ki
    Guru 30330 points
    Hello,

    Is this issue resolved? There are a few open questions, both from the SW development side, as well as the CCS issues. Please let us know so that we may close this post.

    Thanks,
    Mark