program will not fit into available F28069M.cmd in tms320f28069

alwyn antony

Other Parts Discussed in Thread: TMS320F28069, CONTROLSUITE

Dear All,

Currently i am working on code of Insta spin motion (Proj 5e), i am getting a following error

"program will not fit into available F28069M.cmd "
how to solve this issue and optimize, and also i want to know the GUI PART from the code.

please give any suggestions

Regards,

Alwyn

over 9 years ago

0 YiKai Chen over 9 years ago

Guru 735695 points

I suggest you to post TMS320F28069 issue to e2e.ti.com/.../

0 Elizabeth Joy over 9 years ago in reply to YiKai Chen

TI__Expert 5940 points

Hello,

I recommend looking at the linker command file in your project and comparing with one of these 2 linker command files: f28069M_ram_lnk.cmd or F28069M.cmd. The f28069M_ram_lnk.cmd is for RAM configuration and F28069M.cmd for Flash configuration.

These can be found in controlSUITE:
controlSUITE\device_support\f2806x\v151\F2806x_common\cmd\

If you haven't seen it yet, here is a resource on linker command files:
processors.wiki.ti.com/.../C28x_Compiler_-_Understanding_Linking

This should help you modify the given linker command file to fit your project's needs.

Elizabeth

C2000™︎ microcontrollers

C2000 microcontrollers forum

program will not fit into available F28069M.cmd in tms320f28069