Solar Micro Inverter Not working with Sample Board....

jinhwa kim

Prodigy 30 points

I connect power +15V , +12V, And USB cable...

Not connect PV Input..

And try to connect to board....

But not working....

So I try to connect with another sample s/w....

C:\ti\guicomposer\webapps\modem_m3\ modem_m3_gc_app.exe

This working Well....

I attatch the result screen capture file....with pdf format.

please help me....!

C2000_Picclo_QA_1.pdf

over 8 years ago

0 Michael J Schultis over 8 years ago

TI__Mastermind 24885 points

Hello,

What board or TI part might you be using?
I am moving this post to the C2000 forum for better support.

Best,
Michael

0 jinhwa kim over 8 years ago in reply to Michael J Schultis

Prodigy 30 points

Thanks for your reply....

My Board order type is "TMDSSOLARUINVKIT-Solar Micro Inverter Development Kit"

ordered a weeks ago....And received 3days ago....

PCB Printed version is " C2000 SOLAR MICRO INVERTER PPD REV 3.0"

I attatch the image....

0 Manish Bhardwaj over 8 years ago in reply to jinhwa kim

TI__Mastermind 43730 points

so the issue is that you are not able to establish JTAG connection to the board,

for this i would recommend you update us with where exactly in the process are you

Section 5.2, point 3:
Check the switch SW3 is set to ON position on the control card, to enable JTAG connection.

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

C2000™︎ microcontrollers

C2000 microcontrollers forum

Solar Micro Inverter Not working with Sample Board....