Unable to perform flash erase and write in TMS320F28835 using code

Sailesh Pandey

Prodigy 65 points

Other Parts Discussed in Thread: CONTROLSUITE

Hello,

I unable to perform flash write and erase operation using code/programming.

I seen code example for SCI boot but not working. Do only using SCI we can

erase and write in flash or without that also.

Please help me out or let me know if any example other than sci boot is available.

With Regards

Sailesh

over 9 years ago

0 Gautam Iyer over 9 years ago

Guru 192875 points

Hi Sailesh,

You can flash the controller using JTAG for eg. with XDS100v2.

Regards,
Gautam

0 Sailesh Pandey over 9 years ago in reply to Gautam Iyer

Prodigy 65 points

Thanks Gautam for fast reply.

I am using JTAG but from my code also I want to program and erase one sector e.g SectorH and keep array.
Mainly I want to update array which will be copy of array stored in flash and in case of any changes required runtime I want to erase and prog it. So, I have latest data in next power cycle/power-on

0 Manoj Santha Mohan over 9 years ago in reply to Sailesh Pandey

TI__Guru 55700 points

Sailesh,

We have a control suite example which shows you how to do it. Please refer to that example.

<controlSUITE>\libs\utilities\flash_api\2833x\28335\v210\example

0 Manoj Santha Mohan over 9 years ago in reply to Manoj Santha Mohan

TI__Guru 55700 points

Was your question answered? Can I close this thread?

-Manoj

C2000™︎ microcontrollers

C2000 microcontrollers forum

Unable to perform flash erase and write in TMS320F28835 using code