F28M35H52C: what is different between Boot to flash and Boot to Master Subsystem Flash memory?

John zhang

Part Number: F28M35H52C

All

F28M35 can work nomal from Boot Mode 15(Not supported (Defaults to Boot-to-Flash)),but not work nomal from Boot Mode 7(Boot to Master Subsystem Flash memory).what is different between Boot to flash and Boot to Master Subsystem Flash memory?thanks

over 8 years ago

0 Vivek Singh over 8 years ago

TI__Guru** 115271 points

Hi John,

Both boot modes are same and should work same way. Please double check the boot pin value to make sure these are driven with correct value.

Regards,

Vivek Singh

0 Vivek Singh over 8 years ago in reply to Vivek Singh

TI__Guru** 115271 points

Were you able to resolve this?

0 Vivek Singh over 8 years ago in reply to Vivek Singh

TI__Guru** 115271 points

Closing this post with assumption that this is resolved. If you still face this issue, please reopen this post or start a new one.

C2000™︎ microcontrollers

C2000 microcontrollers forum

F28M35H52C: what is different between Boot to flash and Boot to Master Subsystem Flash memory?