• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 388 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/TMS320F28032: the counter of timer 2 based on rising edge or falling edge

John Zhang
Prodigy 130 points
Part Number: TMS320F28032
Other Parts Discussed in Thread: CONTROLSUITE

Tool/software: Code Composer Studio

Hi All,

We used the TMS320F28032PNT in the stepper-motor drive,now I want to know the counter of timer 2 based on rising edge or falling edge?

if there is any PDF,please show on the attachment or supply the download path,thanks.

  • 0
    Guru 192875 points
    Hi John,

    You can use eCap module to get the above info. Refer to the eCAP userguide from device homepage. Here's the example code to get you started:
    C:\ti\controlSUITE\device_support\f2803x\v130\DSP2803x_examples_ccsv5\ecap_capture_pwm

    Regards,
    Gautam