TMS320F2812: DS2_LED_Control

Pravinkumar J

Part Number: TMS320F2812

I need a code to toggle the DS2 LED. DS2 LED turns ON by default. I read JP10 controls the LED behaviour but I could not find JP10 in my hardware.

I'm learning to use this controller. So I need to start with LED toggle.

over 8 years ago

0 Brett Larimore over 8 years ago

TI__Guru 57255 points

Hi Pravinkumar,

It is not clear what hardware you are using. Are you using some kind of development kit? If so, which?

Note that if you're using the ezdspF2812, please see the following link for details on this kit:
http://c2000.spectrumdigital.com/ezf2812/

You can find software examples for getting started at the following link (see the zip):
http://www.ti.com/tool/sprc097

Hopefully this helps!

Thank you,
Brett

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F2812: DS2_LED_Control