CCS/TMS320F28027F: problem with Debugging

Indrajit Lawande95

Part Number: TMS320F28027F
Other Parts Discussed in Thread: C2000WARE

Tool/software: Code Composer Studio

I am using c2000 piccolo launchpad (28027f) for uart communication to control bq76pl455 BMS IC. I have written the code and when i build , it shows 0 errors and 3 warming . But when i debug code i can't press resume button to run program and launchpad runs program from flash memory which blinks led.

I have added the image of warnings

over 8 years ago

0 Gautam Iyer over 8 years ago

Guru 192875 points

Hi Indrajit,

Is the Resume button greyed out after program load is completed? Can you open out the warning, only partial text is visible above?

Regards,
Gautam

0 Indrajit Lawande95 over 8 years ago in reply to Gautam Iyer

Expert 1350 points

0 Christopher Chiarella over 8 years ago in reply to Indrajit Lawande95

TI__Mastermind 30255 points

Hello

Those warnings mean that in your code, code is being assigned to those sections, but those sections aren't assigned to a memory location in your linker.

Refer to linkers in C2000Ware for further understanding.
Additionally, helpful wikis:
processors.wiki.ti.com/.../Linker_Command_File_Primer
processors.wiki.ti.com/.../C28x_Compiler_-_Understanding_Linking

Best Regards
Chris

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F28027F: problem with Debugging