• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 81 subscribers
  • Views 548 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

F28M36P63C2: m3 EPI peripheral

alessio margan
Prodigy 200 points

Part Number: F28M36P63C2

Hi all,

is possible to use m3 EPI peripheral instead of EMIF delfino as described in http://www.ti.com/tool/TIDM-DELFINO-ETHERCAT for interfacing ET1100 with concerto MCU ?

TIA

Alessio

  • 0
    TI__Guru 62975 points
    Alessio,

    The ET1100 interface is asynchronous memory. EPI supports asynchronous memory so signal-wise it should work with ET1100.

    Disclaimer: No one has confirmed this in the lab and the support software will need to be ported.

    -Tommy