Codeskin programmer

Vinayak Nevpurkar

Prodigy 180 points

I am using the Codeskin Programmer could any sort out the below issue

I am getting the error Failed opening: XDS100V1 (error 1015 @ 0X0)

over 8 years ago

0 Gautam Iyer over 8 years ago

Guru 192875 points

Hi Vinayak,

This can have multiple reasons like:
1. Either the device is locked and you need to unlock the same first with the input password.
2. Device is in permanently locked condition and needs to be replaced with a new one
3. There's a loose connection between debugger and JTAG header wherein debugger is unable to communicate with the mcu.

Can you check with CCS too? Try burning or debugging the same project.

Regards,
Gautam

0 Vinayak Nevpurkar over 8 years ago in reply to Gautam Iyer

Prodigy 180 points

ok thanks will check and revert

C2000™︎ microcontrollers

C2000 microcontrollers forum

Codeskin programmer