LAUNCHXL-F28377S: Need positions of the pins and holes

Lukas Clemenz

Part Number: LAUNCHXL-F28377S

I have a question regarding your product, type number: LAUNCHXL-F28377S. Currently I am a student of electrical engineering and am in a project dealing with this product.

My task is to develop, which is equipped with a LCD, a rotary encoder and two coax connectors, and can be used on the LAUNCHXL F28377S a Board. Unfortunately, I bring the positions of the pins and holes not in experience. Now, I wanted to ask whether it is possible to share them with me.

I hope you can help me.

Best regards

L. Clemenz

over 8 years ago

0 Gautam Iyer over 8 years ago

Guru 192875 points

Hi,

Are you looking for the schematics /layout? If so you need to download controlSuite and navigate to: C:\ti\controlSUITE\development_kits\LAUNCHXL-F28377S\HwDevPkg

Regards,
Gautam

0 Lukas Clemenz over 8 years ago in reply to Gautam Iyer

Prodigy 50 points

Thanks for the quick reply.
Can I read the mass and the position of the pins and the drill from it?

0 Gautam Iyer over 8 years ago in reply to Lukas Clemenz

Guru 192875 points

Yes you can very well.

C2000™︎ microcontrollers

C2000 microcontrollers forum

LAUNCHXL-F28377S: Need positions of the pins and holes