• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 81 subscribers
  • Views 467 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28379D: TMS320F28379D EXPERIMENTAL KIT

yedida ayyappa rudrasimha
Prodigy 180 points
Part Number: TMS320F28379D
Other Parts Discussed in Thread: TMDSCNCD28379D, CONTROLSUITE

Hi,

I am genearting 6 updown triangles(carruiers) for three phases. Two sets of carriers I have generated using EPWM1x to EPWM6x. I want to generate 3rd set using EPWM7A to EPWM12A but I didnt find pin numbers first thing and second one Can i synchornize &th EPWM modulw with 1st one?

Can any one guide me where can i find the pin numbers on kit for  EPWM9A to EPWM12A??

Thanks,

  • 0
    TI__Guru 57255 points

    Hi Yedida,

    Please take a look at the HSEC pinout reference document for the TMDSCNCD28379D.  Note that the silkscreen labels on the Docking Station baseboard align with the column "HSEC pin".  Also note that the column "Most compatible use" does not show all the various peripheral options available on a pin, just the most compatible between controlCARDs.
    \controlSUITE\development_kits\~controlCARDs\TMDSCNCD28379D_v1_0\R1_3\

    You can then refer to the F28379D datasheet for the GPIO pinmux information.  I find the table under 'Pin Multiplexing' the most visually appealing way to view this information.

    Between these two pieces of information you should be able to find a place to interface with EPWM9A-EPWM12A.  Hopefully this helps!


    Thank you,
    Brett