TMS320F28375S: Relationship between "User OTP Bank 0+User OTP Bank1" and "DCSM Zone1 + DCSM Zone2"?

Xin Chen

Part Number: TMS320F28375S

Hi,

Would you describe the relationship(logic) between "User configuration DCSM OTP bank0(0x78000-0x783FF)+User configuration DCSM OTP bank1(0x78800-0x78BFF)" and

"DCSM Zone1 + DCSM Zone2 "?

Thanks~

Best regards~

Xin

over 8 years ago

0 Vivek Singh over 8 years ago

TI__Guru** 113745 points

Hi Chen,

For this device, USER configuration DCSM OTP bank1 is not applicable. Where do you see the description for the same?

Also dual zone model (DCSM Zone1 and DCSM Zone2) is for third party development. Basically two different developer can have their own secure zones with out sharing the code but can still call each other functions. If that's not needed then user can use just one zone.

Regards,
Vivek Singh

0 Xin Chen over 8 years ago in reply to Vivek Singh

Intellectual 590 points

Hi Vivek,
That is to say "User configurable DCSM OTP Bank 1 (0x0007 8800-0x0007 8BFF)" can be used as common OTP for stroring data?But "User configurable DCSM OTP Bank 0(0x0007 8000-0x0007 83FF) " is used for configuration of DCSM Zone1 and DCSM Zone2.
Thanks~&Best regards~
Xin

0 Vivek Singh over 8 years ago in reply to Xin Chen

TI__Guru** 113745 points

Hi Xin,

No, USER OTP can not be used as common OTP for storing data.

Regards,
Vivek Singh

0 Xin Chen over 8 years ago in reply to Vivek Singh

Intellectual 590 points

Hi Vivek,
Thanks~
Best regards~
Xin

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28375S: Relationship between "User OTP Bank 0+User OTP Bank1" and "DCSM Zone1 + DCSM Zone2"?