LAUNCHXL-F28377S: error #41: expected an identifier

Takano

Part Number: LAUNCHXL-F28377S
Other Parts Discussed in Thread: C2000WARE

Hi All,

I meet an error as follows;

failed
"C:\ti\c2000\C2000Ware_1_00_00_00\device_support\f2837xs\headers\include\F2837xS_analogsubsys.h", line 79: error #41: expected an identifier

Does anyone know reason and solution for this error?

Best,

Takano

over 8 years ago

0 Takano over 8 years ago

Expert 1345 points

Lines made such the error is;
struct TSNSCTL_BITS { // bits description
Uint16 ENABLE:1; // 0 Temperature Sensor Enable
Uint16 rsvd1:15; // 15:1 Reserved
};
Does "X:Y" is supported by C language?

Best,
Takano

0 Christopher Chiarella over 8 years ago in reply to Takano

TI__Mastermind 30255 points

Takano

Yes, it is supported by C. Are you seeing this with a particular example? What compiler version you are using?
I am not seeing any problem with this header.

Best regards
Chris

0 Takano over 8 years ago in reply to Christopher Chiarella

Expert 1345 points

HI Chris-san,

"Enable" is reserved words I used same word in my source code so the error might be ocorred.

After replace Enable with other word, no error. But I can not imagine that the error message is related to the reserved word, simply makes a confusion.

Thanks and Regards,

Takano

C2000™︎ microcontrollers

C2000 microcontrollers forum

LAUNCHXL-F28377S: error #41: expected an identifier