CCS/tms320f28062f: ctrlhandle initialize fali in 28062f

Hi Yanming,

One of my customer also encountered this problem.

As we can see from the User.h, there is  a macro definition as below:

But in the 28062 ,there is no address space to include the L8,only the 28069 has L8 Zone.

As the datasheet describled, the adress 0x13800-0x14000 is usefull for the instalspin.

So, if we want to use the 28062F, how should we define the adress of ctrlhandle and esthandle?

You don't need to do anything more, and only need to follow the default setting (.cmd and initialize) in lab project. The RAM address from 0x13800 to 0x14000 is reserved for InstaSPIN, and is dedicated for all F2806xF device include F28062F also.
You can use F28069F target configuration file or gel file to debug F28062F to read the ctrlHandle in CCS. And don't change .cmd file to over write the RAM address from 0x13800 to 0x14000 which will cause instSPIN fail.