TMS320F2812: Request

Please look through the motor control examples that we have provided in ControlSUITE.

Sean

I think this might fall under the "Legacy Motor Control Solutions" in www.ti.com/.../applications-featured-applications.page

can you just give me the SPRC number to download which has the position control , I have the control suite but it does not have it ssqc019.
Which part of the code should I change or add to make the motor rotate in anticlockwise direction at say 30 deg .

As I see it, look for SPRC179...

Hi Todd Anderson , I am using the SPRC179 but how to do the position control. Can you tell me which part of the code I need to change in order to get 30 deg step 

Sorry, not sure if this will help, but take a look at processors.wiki.ti.com/.../TMS320C2000_Motor_Control_Primer

Hi , I had already read the wiki long back , thanks for your time, if you could help me in the code of sprc179 to configure the angle , that will be a great help, you can send me a test mail at sudhansum.tripathy@yahoo.com, I am stuck how to control the position of the BLDC, the MC board has been modified to support 2 BLDC , I am able to rotate it clock wise and anticlockwise , just needs to know how to control the position. If you have time we can share the desktop to see the code.
Thanks and regards
Sudhansu

Is there anyone from the Motor Control Apps team that could help with this request? I do not have any of the F2812 hardware nor attached motor control hardware to be of further assistance...

Hi Todd I am able to rotate the motot anticlockwise but not able to set the angle , can you please suggest where can I change to set the angle in sprc179