CCS/LAUNCHXL-F28069M: How to implement CAN communication with F20869 Launchpad and other controller.

Rahul kumar41

Prodigy 70 points

Part Number: LAUNCHXL-F28069M
Other Parts Discussed in Thread: DRV8301, CONTROLSUITE, MOTORWARE

Tool/software: Code Composer Studio

Hi a warm greeting to all,

I have F28069m launchpad which is successfully tested with DRV8301 inverter for my bldc motor.

Can somebody tell me for CAN setup to communicate this with other controller?

Thanks.

over 9 years ago

0 Yanming Luo over 9 years ago

TI__Guru** 117290 points

There is no CAN example in motorWare, but you can refer to the CAN example project in controlSUITE to implement CAN communication with other controller. And you can use the CAN transceiver embedded on Launchpad board as CAN interface.

0 Rahul kumar41 over 9 years ago in reply to Yanming Luo

Prodigy 70 points

Thanks Yanming.

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/LAUNCHXL-F28069M: How to implement CAN communication with F20869 Launchpad and other controller.