Tool to generate the C code

Deepak Omanna

Other Parts Discussed in Thread: C2000WARE, CONTROLSUITE

Hi !

I am new to TI micro controllers and it's tools. Just I want to know is there any TI tools which generates all Low level Drivers code (e.g. ADC,TIMERx,PWM,etc).

Previously I was used Processor expert from NXP/Freescale. With this I am able generate the low level drivers code.

Thanks !

over 8 years ago

0 Todd Anderson78572 over 8 years ago

Guru 14640 points

Try checking out C2000ware: www.ti.com/.../c2000ware

0 Kris Parrent over 8 years ago in reply to Todd Anderson78572

TI__Genius 15260 points

Hi Deepak Omanna,

Welcome to TI microcontrollers! As Todd suggested, definitely checkout C2000Ware as that has pre-built drivers and software examples. ControlSUITE is another good one to look at.

I also recommend to look at the Pinmux Tool here (and other tools) here:

If you can give us some examples of the tools you used with NXP/Freescale so we can understand what you're looking for then we may be able to better answer your question.

Regards,

Kris

0 Deepak Omanna over 8 years ago in reply to Kris Parrent

Prodigy 145 points

Hi Kris !
In "Processor Expert" (NXP/Freescale) GUI is available with this we can configure the Low Level Drivers of the selected device.
I will check with PinMux and give you feedback .
Thanks !

C2000™︎ microcontrollers

C2000 microcontrollers forum

Tool to generate the C code