CCS/TMS320F28379D: build configuration options to allow specific folders in each configuration

ashok kumar6

Tool/software: Code Composer Studio

Hi all,

Am using CCSV7, wanted to have custom build configurations , using Build Configurations(DEBUG) wanted to select cmd/ram.cmd by adding DEBUG_RAM and DEBUG_FLASH by adding cmd/flash.cmd.

Here is the dir structre as follows. Please let me know how to do that.

Thanks

over 9 years ago

0 Baskaran Chidambaram over 9 years ago

TI__Genius 17370 points

Can you check if the material at processors.wiki.ti.com/.../Project_Build_Configurations helps.

Regards
Baskaran

0 ashok kumar6 over 9 years ago in reply to Baskaran Chidambaram

Expert 1800 points

Hi Baskaran,

Thank you for you are reply.

The linker cmd files can be exclude for a specific build configuration, instead of adding preprocessor logic in the linker cmd file, is it right?
I mean for each configuration file we can maintain one cmd file.

Thanks

0 Christopher Chiarella over 9 years ago in reply to ashok kumar6

TI__Mastermind 30255 points

Yes, that is correct.

Best regards
Chris

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F28379D: build configuration options to allow specific folders in each configuration