CCS/LAUNCHXL-F28377S: Erros after updating ControlSuite

Jingtai

Genius 4575 points

Part Number: LAUNCHXL-F28377S
Other Parts Discussed in Thread: CONTROLSUITE

Tool/software: Code Composer Studio

After Controlsuite updating there are some errors and the ControlSuite is not able to run.

over 8 years ago

0 programmable solution over 8 years ago

Expert 1500 points

There is another way to update controlsuite that you may wish to try.
------------------------------------------------------------
Note about updating ControlSuite Contents:
Open run as Administrator Command Prompt window. From Command Prompt: C:\ti\controlsuite\updater.exe /checknow

0 Christopher Chiarella over 8 years ago

TI__Mastermind 30255 points

Hello

What error are you seeing? If are getting a blank GUI window, see my answer here: e2e.ti.com/.../401727

Best regards
Chris

0 Jingtai over 8 years ago in reply to programmable solution

Genius 4575 points

The ControlSuite is not able to be opened and I have downloaded the new software and installed successfully. But it likes

The folder

Open run as Administrator Command Prompt window.

0 programmable solution over 8 years ago in reply to Jingtai

Expert 1500 points

0 Gautam Iyer over 8 years ago in reply to programmable solution

Guru 192875 points

Hi,

If you observe a blank window when you open controlSuite you need to clear the contents here:
C:\ti\controlSUITE\eclipse\workspace

Delete .metadata folder.

Regards,
Gautam

0 Jingtai over 8 years ago in reply to Gautam Iyer

Genius 4575 points

It works. Thanks for your support!

0 Jingtai over 8 years ago in reply to Gautam Iyer

Genius 4575 points

I try to use GUI

Although the metadata foldre has been deleted it appears again when the controlSUITE is clicked. Therefore it bacomes

0 Christopher Chiarella over 8 years ago in reply to Jingtai

TI__Mastermind 30255 points

Yes, metadata folder will appear once you run it. You only need to delete it if you are seeing the blank page.
If you are having trouble with the standalone GUI Resource Explorer, you can also try using it from within CCS.

Best regards
Chris

0 Jingtai over 8 years ago in reply to Christopher Chiarella

Genius 4575 points

Thanks for your support!

Even uninstalled the ControlSuite and deleted the TI folder from my disc C the GUI doesn't work. Alright I'll use CCS. I'll learn from SWRA526.

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/LAUNCHXL-F28377S: Erros after updating ControlSuite