TMS320F28377D: trouble setting breakpoint with the action "remain halted"...

Shimon Otsri

Intellectual 550 points

Part Number: TMS320F28377D
Other Parts Discussed in Thread: UNIFLASH

i try to program my board with a checked software on another same board but i see the following error:

trouble setting breakpoint with the action "remain halted" 0xC0E3:......

i tried to erase the flash with uniflash and its not working.

i checked the JTAG chain and it was succesfull.

the MCU is not in reset or something... can anyone help me?

over 8 years ago

0 Baskaran Chidambaram over 8 years ago

TI__Genius 17370 points

Hello,
I am writing to let you know that a C2000 team member has been assigned to this post and should be answering shortly.

Regards
Baskaran

0 Vivek Singh over 8 years ago

TI__Guru** 115881 points

Hi Simon,

If you are able to connect to CCS, please check the memory content at 0xC0E3 and also the main() function via CCS Memory view. Also what happens if you try to run the CPU?

Regards,

Vivek Singh

0 Shimon Otsri over 8 years ago in reply to Vivek Singh

Intellectual 550 points

i cant read the memory content because i cant load the program in the board.
anyway, the same softwaer runs perfectly on another board...

0 Sal Pezzino over 8 years ago in reply to Shimon Otsri

TI__Mastermind 32995 points

If you can connect the debugger via CCS, you can use the memory browser to see the memory contents.

Do you have a specific question still?

sal

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28377D: trouble setting breakpoint with the action "remain halted"...