TMS320F28069F: Cant connect to target with DRV 8301

Rajan Joshi

Expert 1020 points

Part Number: TMS320F28069F
Other Parts Discussed in Thread: DRV8301

Hello,

I opened the 28069M from the box and was able to successfully connect to target.

After I removed J1 and J2 and connected the DRV8301 with a 12 V supply, I cannot connect to the target.

I am not sure what the problem is here.

Regards,

Rajan Joshi

over 8 years ago

0 Sean Bigley over 8 years ago

TI__Genius 17175 points

What are your S1 settings? JP3, 6, 7? Are you using header sets 1-4 or 5-8? Have you probed the VCC/GND pins on the LaunchPad after you've placed the boosterPack and checked if the voltage levels are what you expect?

Sean

0 Rajan Joshi over 8 years ago in reply to Sean Bigley

Expert 1020 points

Sorry for the late reply.

I was mounting the DRV 8301 on the wrong headers on the 28069, when I had the jumpers set for different header.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28069F: Cant connect to target with DRV 8301