CCS/F28M35H52C: CANOpen to HMI

ADA LAM

Part Number: F28M35H52C

Tool/software: Code Composer Studio

I have a HMI with CANOpen communication. But TI provides only the DCAN. I was advised to have SIMM SOFTWARE to work on.

I am using Code Composer. Is the SIMM Can driver working on the Code Composer? I have been shopping around for a HMI that could talk to the TI F28M35x.

Please help me.

Thanks.

over 9 years ago

0 Baskaran Chidambaram over 9 years ago

TI__Genius 17370 points

in my opinion Simma driver dont have ready made CCS project. you have to make on your own.

Regards
Baskaran

0 Hareesh Janakiraman over 9 years ago in reply to Baskaran Chidambaram

TI__Guru* 95315 points

I presume this post is a continuation of the discussion initiated in

https://e2e.ti.com/support/microcontrollers/c2000/f/171/t/608673 . Please do not create a new post in such situations. Kindly continue the discussion in the old post itself.

I am not familiar with "SIMM SOFTWARE". Please provide more details on it. If you are referring to CANopen driver from Simma Software, please contact them directly http://www.simmasoftware.com/

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/F28M35H52C: CANOpen to HMI