TMDSSOLARCEXPKIT: Cant find schematic for the TMDSSOLARCEXPKIT, only for the Piccolo version, in ControlSuite

Hello,
I am writing to let you know that a C2000 team member has been assigned to this post and should be answering shortly.

Regards
Baskaran

Hi Manish.
It would still make good sense for you to verify which PWM's, ADC channels etc. is used...
If the customer isnt informed about this, its hard to use the EVM.

BR
Anders

Anders,

I am not sure why you say this. The kit supports 

Now if i look at the Pic B control card here is what is pinned out is as follows 

For Concerto it is

Now the PWM and GPIO are very similar to the PIc-B,

ADC is different, and the software we provide in controlSUITE comprehends this. 

The board was verified with the concerto control card. Otherwise we will not mention it in the UG nor have SW in controlSUITE which uses it. 

If you can advise on what exact steps the customer is facing issue with it will help us to understand the problem. 

Also, have they at least tried running the software as - is ? I would recommend they can trust the SW we provide to be verified for the board to begin with. And follow the steps in the UG.