TMS320F28377S: Can the 'upp' work with a FiFo

hai xuan

Intellectual 735 points

Part Number: TMS320F28377S

Hi everyone,

I am planning using the upp to connect with the FT2232H, which will be set to the 245 FIFO interface.

Will this work?

over 9 years ago

0 Baskaran Chidambaram over 9 years ago

TI__Genius 17370 points

Hello,
I am writing to let you know that a C2000 team member has been assigned to this post and should be answering shortly.

Regards
Baskaran

0 Vivek Singh over 9 years ago

TI__Guru** 117431 points

Hi,

Any specific reason to use the uPP and not other standard interface like SPI or UART? uPP was introduced on this device for specific usecase (to talk to remote device with uPP interface) and it may not be available on next generation devices hence asking this.

Vivek Singh

0 hai xuan over 9 years ago in reply to Vivek Singh

Intellectual 735 points

HI,
I am looking for higher interconnection speed. Ft2232H actually handles with 480Msps USB 2.0 transmission speed, so I prefer use FIFO interface which means 70M*8bit.

0 Vivek Singh over 9 years ago in reply to hai xuan

TI__Guru** 117431 points

Max frq for uPP is 50MHz.

Vivek Singh

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28377S: Can the 'upp' work with a FiFo