CCS/TMS320F28379D: programming for Sine wave

kudithi nageswararao

Expert 1055 points

Part Number: TMS320F28379D
Other Parts Discussed in Thread: C2000WARE

Tool/software: Code Composer Studio

i want sine wave with 50hz

how to write the program for this

i checked the c2000ware examples i could not find

any one could give some example programming for this.

over 8 years ago

0 Gautam Iyer over 8 years ago

Guru 192875 points

Hi,

You can implement the same using Signal generation library. You can find the library and user guide for the same here:
C:\ti\c2000\C2000Ware_1_00_01_00\libraries\dsp\SGEN

Regards,
Gautam

0 kudithi nageswararao over 8 years ago in reply to Gautam Iyer

Expert 1055 points

Hi Gautam
Thank you for your response
but i need some more explanation towards this one...please give some doc or video

0 Gautam Iyer over 8 years ago in reply to kudithi nageswararao

Guru 192875 points

You can find detailed documentation here: C:\ti\c2000\C2000Ware_1_00_01_00\libraries\dsp\SGEN\c28\docs

0 kudithi nageswararao over 8 years ago in reply to Gautam Iyer

Expert 1055 points

Thank you

Gutam

actually my problem is this one i have to get PWM like this fig.

that means sine wave with 50hz and saw-tooth wave with 20khz.

finally my PWM with 20khz. could i get any example like this..

Image result for unipolar pwm

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F28379D: programming for Sine wave