CCS/TMS320F28335: I configured the ccsv5 with matlab 2016a.There is a problem in genration of .out file for small simulink program in matlab.

praveen kumar37

Part Number: TMS320F28335

Tool/software: Code Composer Studio

here i need to blink led for every 0.5 sec. The GPIO digital output is set at pin 34.

here i am getting error like it didn't find compiler path.I am not getting the information from here.

this is my configuration. here i given version 5.2.15 code generation tools.But why i am getting this error i don't know.Somebody could you help me on this.

With regards,

praveen

over 7 years ago

0 Brian McKay over 7 years ago

Mastermind 9005 points

Hi Praveen,

I think your MATLAB is configured for CCSv6, but you did the checkEnvSetup for CCSv5. the setup for CCSv5 looks ok, best I can tell.

Try typing targetupdater at the MATLAB command line and set up for CCSv5 instead of CCSv6.

For additional help, please contact MathWorks Technical Support.

Cheers,

-Brian

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F28335: I configured the ccsv5 with matlab 2016a.There is a problem in genration of .out file for small simulink program in matlab.