TMS320F28379D: TMS320F28379

eli

Part Number: TMS320F28379D

Looking for solution/recommendation,how to connect 3 parallel F28379 device,via Ethernet interface to a switch control?

For example,can it be done by an ARAM device?

over 8 years ago

0 Santosh Athuru over 8 years ago

TI__Mastermind 19810 points

eli,
we don't have such solution, but customers can integrate an external EMAC to the MCU using SPI or other interfaces possible.

Also please take a look at TI Design (www.ti.com/.../TIDM-DELFINO-ETHERCAT) to add EtherCAT on the MCU if that helps.

Best Regards
Santosh

0 eli over 8 years ago in reply to Santosh Athuru

Guru 13485 points

The related link is not working.Cant find the TI design to add EtherCat.

Can you recheck?

0 Santosh Athuru over 8 years ago in reply to eli

TI__Mastermind 19810 points

www.ti.com/.../TIDM-DELFINO-ETHERCAT

please try above.

Best Regards
Santosh

0 Santosh Athuru over 8 years ago in reply to Santosh Athuru

TI__Mastermind 19810 points

Also, please take a look at below link. Below gives you a link for a kit that you can order to evaluate EtherCAT on the MCU.

www.ti.com/.../TMDSECATCNCD379D

Best Regards
Santosh Athuru

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28379D: TMS320F28379