• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 83 subscribers
  • Views 402 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INSTASPINFOCMOTORWAREGUI: Migrating from the Eval board to the Product

Devon Curry
Prodigy 470 points

Part Number: INSTASPINFOCMOTORWAREGUI
Other Parts Discussed in Thread: TMDSHVMTRINSPIN, CONTROLSUITE

Is there any documentation for migrating the INSTASPIN software for the TMDSHVMTRINSPIN from the eval board to the actual product? He would like to know if there is a schematic available?

  • 0
    TI__Guru** 116880 points
    The schematic of the EVM boards can be found in the directory of ControlSUITE as below if you installed it in default mode.
    \ti\controlSUITE\development_kits\HVMotorCtrl+PfcKit_v2.1\~HVMotorCtrl+PFC-HWdevPkg\HVMotorCtrl+PFCKit-R1.1
    And then you need to design yourself board, and change the GPIO configuration, hardware parameters in user.h. You can refer to below link to get more detail information.
    e2e.ti.com/.../287352