• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 83 subscribers
  • Views 597 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Powering a custom linear induction motor using the c2000 28027f launch pad with Boostxl drv8301 revb

Naveed Oroumchian
Prodigy 10 points

Other Parts Discussed in Thread: DRV8301, MOTORWARE

I am trying to power custom linear induction motor by 3 phase using the  c2000 28027f launch pad with Boostxl drv8301 revb. I am looking at the tutorials but I dont completely understand them. I wanted to know if there was a way to do this.

  • 0
    TI__Guru** 117270 points

    There is no dedicated guide to drive a linear induction motor in motorware, but you can use the example project for 3-phase ACI motor example project to implement it. All instaSPIN-FOC labs can support both PMSM and ACI. More operation guide can refer to instaSPIN lab guide which can be found in motorware.