LAUNCHXL-F28377S: How to build graphical interface for CAN bus data management

Dariusz Swierczynski

Intellectual 320 points

Part Number: LAUNCHXL-F28377S

Hi,

I would like to build the graphical interface of CAN data management.

There is available some free software to organize this interface. Maybe it is supported by TI.

There is dedicated software for TI microprocessors.

Regards

Dariusz

over 8 years ago

0 Gautam Iyer over 8 years ago

Guru 192875 points

Hi Dariusz,

You can implement the above using CCS integrated GUI composer. You can refer this wiki for more details:
processors.wiki.ti.com/.../Category:GUI_Composer

Regards,
Gautam

0 Harsh Singh over 8 years ago

TI__Expert 3795 points

Hi user4700872,

As far as i know there is no such software that is supported by TI.

Can you point out to which software you are referring to as supported by TI?

Thanks and Regards
Harshmeet Singh

0 Dariusz Swierczynski over 8 years ago in reply to Gautam Iyer

Intellectual 320 points

Hi.
Do you have example how to mannage CAN frame in GUI composer. Ther are possible in GUIv1 or GUIv2
Regards

0 Gautam Iyer over 8 years ago in reply to Dariusz Swierczynski

Guru 192875 points

You cannot manage frames directly but all the CAN data and registers can be broken down as variables and displayed on the GUI composer as required. There are many Youtube videos that you can refer for something similar.

C2000™︎ microcontrollers

C2000 microcontrollers forum

LAUNCHXL-F28377S: How to build graphical interface for CAN bus data management