TMS320F28379D: TMS320F28379D

javier

Hi,

This DSP allows 16bit or 12bit ADC conversion. I guess that one module can be selected to use differential measurements (16-bit) and the rest left to single ended 12bit conversion.

Or selectable refers to the whole DSP conversion?

thanks

over 8 years ago

0 Gautam Iyer over 8 years ago

Guru 192875 points

Hi Javier,

javier said:
This DSP allows 16bit or 12bit ADC conversion. I guess that one module can be selected to use differential measurements (16-bit) and the rest left to single ended 12bit conversion.

You're absolutely correct.

Regards,

Gautam

0 javier over 8 years ago in reply to Gautam Iyer

Prodigy 40 points

thanks! do you know if 16bit-12bit mis can be achieved within a module? Or whole module is configured entirely to 12 or 16bit.

0 Devin Cottier over 8 years ago in reply to javier

TI__Guru 60865 points

Hi Javier,

This thread and the resources linked therein hopefully will help explain some of the finer points of using both resolutions and switching between them. If you have any additional questions, please feel to post them in this thread.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28379D: TMS320F28379D